Loading ...
Loading ...
Loading ...
Most laundering problems are easily solved if you understand the cause.
Check these lists for common laundry and washer problems. If you need
further assistance, see the back cover.
Problem Possible Cause Solution
Washer Leaks Household plumbing is leaking. Repair plumbing.
For portable washer, fill and Check hose or faucet adapter
drain hose or faucet adapter (see "Portable InstallationInstructions").
not properly attached.
Inlet hoses not tight. Tighten hoses (see "Permanent
InstalIation Instructions").
Inlet hose washers not Reseat washers
properly seated. (see "Permanent Installation Instructions").
Drain hose not properly Clamp drain hose
clamped or is off. (see "Permanent installation Instructions").
Drain is clogged. Remove drain clogs. Sink, standpipe,
or floor drain must be able to handle
13 gaI (49.2 L) of water per minute
(7 gal [26.6 L] per minute for portable
washers).
Load is unbalanced. Spray Redistribute the load.
rinses are deflecting off load.
Won'tDrain/ Drain hose is kinked or Straighten or unplug hose
Won't Spin/ clogged. (see "Permanent Installation Instructions").
Wet Loads
Correct operation of After a wash or rinse, the washer will
neutral drain, drain without spinning. After draining,
the spinning begins.
Lid is open. Close the Iid.
End of drain hose more Lower drain hose
than 72 in (183 cm) above floor (see instructions for portable or
(48 in [122 cm] for portable permanent installation).
washers).
Too much detergent- Use less detergent.
excessive sudsing.
Wrong cycle for Ioad Choose a cycle with a higher
being washed, spin speed (see "Operating Your
Washer").
Low voltage or using an Check electrical source or call
extension cord. electrician. Do not use extension
cords.
Cold rinses. Cold rinses leave loads wetter than
warm rinses. This is normal.
33
Loading ...
Loading ...
Loading ...