Loading ...
Loading ...
Loading ...
Auto-reverse function
If the control unit detects something
caught in the window as it is closing, the
window will be immediately lowered.
The auto-reverse function can be acti-
vated when the window is closed by auto-
matic operation when the ignition switch is
placed in the ON position or for a period of
time after the ignition switch is placed in
the OFF position.
Depending on the environment or driv-
ing conditions, the auto-reverse func-
tion may be activated if an impact or
load similar to something being caught
in the window occurs.
WARNING
There are some small distances imme-
diately before the closed position
which cannot be detected. Make sure
that all passengers have their hands,
etc., inside the vehicle before closing
the window.
When power window switch does
not operate
If the power window automatic function
(closing only) does not operate properly,
perform the following procedure to initial-
ize the power window system:
1. Place the ignition switch in the ON
position.
2. Open the window more than halfway by
operating the power window switch.
3. Pull the power window switch and hold it
to close the window, and then hold the
switch more than 3 seconds after the
window is closed.
4. Release the power window switch. Op-
erate the window by the automatic
function to confirm the initialization is
complete.The power window automati-
cally opens or closes depending on if the
automatic down or up function is
selected.
5. Perform steps 2 through 4 above for
other windows.
If the power window function does not op-
erate properly after per forming the above
procedure have the system checked and
repaired. It is recommended that you visit a
NISSAN dealer for this service.
2-74 Instruments and controls
Loading ...
Loading ...
Loading ...