Loading ...
Loading ...
Loading ...
4
Installation Manual
Chapter 1: Introduction
Congratulations on your purchase of a ne
AudioControl product. You have chosen
wisely. We hope that it will give you many
years of super audio enjoyment and larks.
When you require total control and opti-
mization to achieve great sound quality,
AudioControl’s DM-608 and DM-810 digital
signal processors are the ideal solution.
These powerful processors allow you to truly
optimize the performance of your audio sys-
tem, regardless of whether you are using a
factory or aftermarket source, and to achieve
the goal of “Making Good Sound Great.”
These processors are equipped with key
features, such as active speaker-level inputs,
line-level and digital audio inputs, providing
up to 10 channels of output for the DM-810,
and 8 channels for the DM-608.
Connect your laptop using our smart user
Interface, which is a fully-featured matrix
DSP interface designed to give you instant
and clear control over every aspect of your
processor.
Route any input to any output, congure
signal summing, adjust input and output
gain, delay phase correction and polarity,
FEATURES
• Smart User Interface software included
• Input and Output RTA for precise and
informed tuning
• GTO™ Signal Sensing (ch 1-2)
• MILC™ Clip Detection (ch 1-2)
• AccuBASS®
• Signal Summing
• Signal Delay
• 12 and 24 dB/octave crossovers
• 30 band equalizer
• Optional ACR-3 remote for preset recall
and level control
• Optional Bluetooth interface
• Bulletproof 5 year warranty (when
installed by an authorized AudioControl
dealer)
• Engineered, designed, and manufac-
tured in our leafy, shaded and secluded
audio-goodness technodrome in beauti-
ful Mountlake Terrace, WA.
then precisely tune the processor using a 30
band EQ. High-pass, low-pass and band-pass
can be set up for any output using 12 or 24
dB/octave Linkwitz-Riley crossovers.
For OEM integration, take advantage of the
input and output Real Time Analyzers (RTA),
available for every input and output, to
easily identify and sum factory speaker-level
signals.
The processors also include AudioControl’s
proprietary features such as AccuBASS®,
GTO™ Signal Sense, and MILC™.
The built-in Option Port is our nod to the
future of car audio and will allow hi-res
streaming directly into the DSP. It also
opens up future proprietary connections for
additional inputs, controllers and interface
solutions. Watch our website www.audio-
control.com for future Option Port expan-
sion options.
Please visit our ne and new, bold and lovely
knowledge base at:
www.audiocontrol.com/knowledge-base
for all manner of helpful tips and wisdom
gathered from the collective noodles of our
ne technical support engineers and audio
chaps.
Loading ...
Loading ...
Loading ...