Audio Control DM-810 Installation Manual

Loading ...

Chapter 5: Features

1 2

1110 12 13 14

53 6 7 84

9. Maximized Input LEDs – These LEDs illuminate when a maxi-

mum audio signal is present on any of the analog audio inputs.

During power-up, these LEDs and the output LEDs will turn on

momentarily, one after the other. Turn down the levels if these

LEDs are on a lot.

10. MILC

™

Source Clip LED – The MILC™ (Maximum Input Level

Control) patent-pending level-setting circuit (on inputs 1-2 only)

prevents clipping and damaging distortion. It calculates when the

waveform of an incoming audio signal is clipping, and if it is, this

LED will fulll its destiny and shine forth.

With this advanced feature, you are able to optimize the level of

the incoming audio signal until the Source Clip LED is just-prior

to lighting. If the LED comes on during normal operation, you

should adjust the level of the audio signals before they reach the

DM-608/DM-810.

After an interview with the lead engineer included the words

“dierential calculus,” and some hieroglyphics on a chalk board,

the technical writer’s eyes glazed over and he had to be brought

round with a nice cup of tea and two donuts with sprinkles.

11. Maximized Output LEDs – These LEDs illuminate when there is

maximum signal present on any of the analog audio outputs. Turn

down the output levels if these LEDs are on a lot.

12. USB Activity LED – This LED turns on when there is USB activity

between the DM-608/DM-810 and a computer.

13. Power LED – If you have connected your battery power, vehicle

ground, and turn-on lead (or GTO signal sensing) correctly, then

this LED should turn red to indicate the power is ON.

14. Mounting Holes – These 4 holes are used for mounting the

DM-608/DM-810 securely to your vehicle.

Loading ...

Audio Control DM-810 Eight by Ten Channel DSP Matrix Processor Audio