Loading ...
Loading ...
Loading ...
18
Installation Manual
11. Now that the application and drivers are all installed and ready to
go, it is time to connect to the DM-608/DM-810 unit as follows:
12. Connect the USB micro end of the supplied USB cord into the
DM-608/DM-810 unit, and the USB A type end into a spare USB
port on your computer.
13. Turn on the DM-608/DM-810 either by using the remote trigger or
sending an audio input into channel 1 input (GTO sensing turns
on the unit).
14. The DM-608/DM-810 Power LED should turn red, and the still-run-
ning application (see step 10) should now recognize the DM-608/
DM-810.
Ground
Head Unit
Remote
+12V Trigger
USB A
Micro USB
+12V
3A Fuse
15. A small window will pop up in front of the GUI, asking you to en-
ter your password. The rst time you do this, enter 1234. You can
change the password later to protect your system from carnival
folk and rodeo clowns.
16. The unit’s rmware version and details will appear at the top
center of the main display, and “On Line” appears at the bottom
left. The application and the unit are now connected and talking
to each other nicely, like old friends.
17. Put the kettle on, it’s time for tea.
Chapter 6: Installing the Application
Loading ...
Loading ...
Loading ...