Loading ...
Loading ...
Loading ...
14
Installation Manual
3. Coaxial and Optical Digital Inputs – These S/PDIF and Toslink
inputs allow you to connect the digital audio output from source
units. These inputs share the use of inputs 7 and 8 as follows: If a
digital signal is present, then input channels 7 and 8 receive the
audio from the digital source. If there is no digital signal present,
then inputs 7 and 8 are the sum of the speaker-level inputs 7 and
8, analog line-inputs 7 and 8, and any streaming audio coming in
via Bluetooth connection on the Option Port.
4. RCA Analog Line-Level Outputs – These line-level analog out-
puts from the DM-608/DM-810 connect to the line-level inputs of
your power ampliers and other equipment. The matrix capa-
bilities of the DM-608/DM-810 allow you to pick and choose the
outputs from any combination of inputs, add crossovers and EQ as
required.
5. Remote Control Connector – This connects to the optional
ACR-3 remote level control using a standard telephone cord and
connectors.
6. USB Micro Connector – This connects to the USB A port of your
computer in order to use the control software to congure the
DM-608/DM-810.
7. Options Port – This port allows you to connect our optional Blue-
tooth adapter, so you can stream audio into channels 7 and 8 from
your Bluetooth-enabled devices. Further details will be available
when this accessory and others become available.
8. Power Input Terminal +12V – This screw terminal connects to
the +12V battery binding post of the vehicle. Use quality insulated
wire.
Power Input Terminal Ground – This screw terminal connects to
a good ground connection on the vehicle. Use quality insulated
wire.
Remote Power Input Terminal – This screw terminal connects to
the 12V remote trigger output of some head units. When the head
unit is turned on, then the DM-608/DM-810 will turn on. Alterna-
tively, you can use the GTO feature of the DM-608/DM-810 so it
will turn on when an audio signal is detected at the speaker-level
or line-level inputs of channels 1-2.
Remote Power Output Terminal – This screw terminal con-
nects to the 12V remote trigger input of other units and ampli-
ers down the line. When the head unit is turned on, then the
DM-608/DM-810 will turn on and this daisy-chain connection will
allow other units in your system to turn on.
Chapter 5: Features
Bluetooth
Option
Loading ...
Loading ...
Loading ...