Loading ...
Loading ...
Loading ...
29
RTA (Input)
1. The input RTA shows the level of signal at the input of the DSP,
post gain control (that is, after the gain control has done its thing).
2. For stereo inputs, the RTA shown is the sum of the left and right
channels, so if you have two channels out of phase, very little will
show. If your left and right channels are not time-aligned, you will
see comb ltering.
3. The sensitivity control is labeled to match the classic AudioControl
SA-3050.
4. The speed control changes the settling rate (fast, medium, slow).
Note that the low frequencies always have a slower settling time
than the higher frequencies, as they require longer to stabilize.
Chapter 8: The Display: Input View
Loading ...
Loading ...
Loading ...