Loading ...
Loading ...
Loading ...
Vitality Series Selectorized Line Chest Press Assembly Guide: Assemble the Equipment 4
Attach the Movement Arm to the Seat Frame
1. With assistance, align the movement arm in the pivot bracket on the seat
frame. Have your assistant hold the movement arm in place, while you slide
the axle through the pivot bracket and movement arm bushings.
Note: The axle will be tight on the bearings and may require using a rubber
mallet to press through the bearings in the movement arm. When pressing
the axle into place, be sure the D-shape of the axle lines up with the D-
shape on the inside of the pivot bracket. If the axle does not press through,
then check the alignment of the axle to the pivot bracket.
2. Secure the pivot axle on each side using:
2 – Aluminum end caps
2 - M10 x 25 mm flat head cap screws
3. Tighten the two bolts using the two S6 hex keys supplied in the hardware kit.
Figure 3: Movement arm attachment
Loading ...
Loading ...
Loading ...