Loading ...
Loading ...
Loading ...
Installation Set-up and System Start-up
85 Liebert
®
SRC™ User Manual
7.0 Installation Set-up and System Start-up
NOTICE
Risk of improper thermostat installation. Can cause unit malfunction.
The Installer setting mode sets up the detailed function of the thermostat.
If the installation is not set correctly, it can cause problems for the product, user injury, or property
damage. Install
ation set-up must be performed by a certified technician. Non-certified personnel
attempting to install or make changes shall be responsible for any adverse effects or operation.
7.1 Accessing Installer Set-up Mode
1. On the thermostat, press for at least 3 seconds.
The function code displays.
2. Refer to the following procedures and Table 7-1 to make the correct settings for your installation.
NOTE
A press less than 3 seconds enters “user” settings mode.
NOTE
Some menu options and functions may not be displayed or the menu name
may be different depending on your system and model.
Table 7-1 General unit functions—Installer set-up codes
Function
Code Description Value
01 Test Run 01 = Set
02 Address Setting 00 ~ FF = Address
03 E.S.P Value
Step:
01 = Very Low
02 = Low
03 = Med
04 = High
05 = Very High
Value:
0 ~ 255
04 Thermistor
01 = Remo
02 = I
ndoor
03 = 2TH
05 Ceiling Height
01 = Low
02 = Med
03 = High
04 = Very High
06 Static Pressure
01 = V-H
02 = F-H
03 = V-L
04 = F-L
Some menu options and functions may not be displayed or the menu name may be different
depending on your system and model.
MFL67502030 17. 7. 13. 오오 3:05 Page 95
Loading ...
Loading ...
Loading ...