Loading ...
Loading ...
Loading ...
Important Safety Instructions
Liebert
®
SRC
™
User Manual 4
NOTICE
Risk of exposure to corrosive environments. Can cause equipment damage. Don’t install the unit
where it’s directly exposed to ocean winds.
Ocean winds may cause corrosion, particularly on the condenser and evaporator fins, which, in
turn could cause product malfunction or inefficient performance.
NOTICE
Risk of water damage and abnormal vibration. Can cause equipment damage
When installing the unit in a low-lying area, or a location that is not level, use a raised concrete pad
or concrete blocks to provide a solid, level foundation.
NOTICE
Risk of excessive condenastion. Can cause building and equipment damage.
Properly insulate all cold surfaces to prevent “sweating.” Cold surfaces such as uninsulated piping
can generate condensate that may drip and cause a slippery floor condition and/or water damage
to walls.
!
CAUTION
Risk of exposure to excessive refrigerant concentration and oxygen depletion. Can cause illness
or injury. If the unit is installed in a small improperly or non-ventilated space, take measures to
prevent the refrigerant concentration from exceeding safety limits in the event of a refrigerant
leak.
Consult the latest edition of ASHRAE (American Society of Heating, Refrigerating, and Air
Conditioning Engineers) Standard 15.
!
CAUTION
Risk of contact with extremely hot and cold surfaces. Can cause injury. Refrigerant piping is
extremely hot or cold during unit operation. Do not touch the refrigerant piping during or after
operation. Wear thermally insulated gloves and arm protection or allow the piping to cool or
warm
to a safe handling temperature before working on the piping.
!
CAUTION
Risk of improper lifting and moving of a heavy unit. Can cause building and equipment damage
and injury. Be very careful when transporting the product.
• Do not attempt to carry the product without assistance. Some products use polypropylene
bands for packaging. Do not use polypropyl
ene bands to lift the unit.
• Suspend the unit from the base at specified positions.
• Support the unit a minimum of four points to avoid slippage from rigging apparatus.
Verify that all lifting apparatus is rated for the weight of the unit. See XREF TABLE for indoor and
outdoor
unit weights.
!
CAUTION
Risk of contact with sharp edges, and extremely hot or cold components. Can cause injury. Wear
OSHA approved head and eye protection, thermally insulated gloves and arm protection or allow
the unit to reach a safe for contact temperature and use caution when cleaning
or servicing the
unit.
MFL67502030 17. 7. 13. 오오 3:05 Page 14
Loading ...
Loading ...
Loading ...