Loading ...
Loading ...
Loading ...
To set cruising speed, accelerate your ve-
hicle to the desired speed, push the SET–
switch
O
C
and release it. The ICC system
set indicator (green), vehicle ahead detec-
tion indicator, set distance indicator and
set vehicle speed indicator
O
B
will come on.
Take your foot off the accelerator pedal.
Your vehicle will maintain the set speed.
When the SET– switch is pushed under the
following conditions, the system cannot be
set and the ICC indicators will blink for ap-
proximately 2 seconds:
• When traveling below 20 mph (32 km/h)
and a vehicle ahead is not detected
• When the shift lever is not in D (Drive) or B
mode
• When the parking brake is applied
• When the brakes are operated by the
driver
When the SET– switch is pushed under the
following conditions, the system cannot be
set.
A warning chime will sound and a message
will pop up:
• When the VDC system is off (To use the
ICC system, turn on the VDC system. Push
the ICC switch to turn off the ICC system
and reset the ICC switch by pushing the
ICC switch again.)
For additional information about the
VDC system, see “Vehicle Dynamic Con-
trol (VDC) system” (P. 5-159).
• When VDC is operating
• When a wheel is slipping (To use the ICC
system, make sure the wheels are no lon-
ger slipping.)
LSD2854 LSD2894
5-74 Starting and driving
Loading ...
Loading ...
Loading ...