Loading ...
Loading ...
Loading ...
READY POWER FAULT Status and action to be taken
○○ ○
All LED lamps will light for a 1/2 second check when EVSE is first connected to an
outlet.
○● ●
After initial processing is completed, when the EVSE is not connected to the ve-
hicle, or the EVSE is connected to the vehicle but charging is not being performed.
For additional information, see “Charging troubleshooting guide” (P. CH-56).
○○ ●While the Li-ion battery is being charged
●● ●
If the EVSE control box indicator light does not illuminate after connecting the
plug to the outlet, check the GFCI and circuit breaker for the outlet. If either the
GFCI or breaker has tripped, the circuit may not be suitable for use with EVSE. You
should have a qualified electrician inspect and repair the electrical circuit. If the
GFCI breaker is not tripped, stop using the EVSE. It is recommended that you visit
a NISSAN certified LEAF dealer.
嘷
○
●●
The EVSE could not detect sufficient grounding at outlet for reliable EV charging.
Consult a qualified electrician to have the outlet checked.
嘷
○
嘷
○
嘷
○
When the temperature of the electrical plug is too hot or the EVSE is unable to de-
tect the temperature of the electrical plug.
The EVSE is restricting the charging current for safety according to the tempera-
ture of the electrical plug.
POWER Lamp status:
○ = No charging current restricted.
嘷
○ = Charge current restricted
● = Charge stopped
This problem may be caused by a failure in the outlet.
Stop using the outlet and consult a qualified electrician.
If the same indication continues after checking an outlet, it is recommended that
you visit a NISSAN certified LEAF dealer.
嘷
○
● 嘷
○
CH-54 Charging
Loading ...
Loading ...
Loading ...