Loading ...
Loading ...
Loading ...
6
Touch No if your accessory receives power from your
ecobee3. There will be a single wire to ACC+.
Need Help? See page 32 for information on how to determine
your accessory device's power configuration.
Touch Next to continue.
Step 3. Temperature Preference Setup
Your ecobee3 will ask you to select Fahrenheit or Celsius as your
preferred temperature units. Touch Next to continue.
Step 4. Equipment Configuration
Your ecobee3 will ask you to configure your equipment.
Depending on your wiring, different options will be available.
These options will configure basic system operation as well as
optimize the system for your specific type of equipment.
Review the list to see if any devices require additional
configuration ("Configuration needed") and if the default
settings are valid.
Once you are done, touch Next to continue.
Heat Pumps
If you have a heat pump installed:
1. Select the heat pump menu.
2. Select Air to Air or Geothermal depending on the type of
your heat pump system
3. Specify what the heat pump runs when the O/B
Reversing Valve is engaged: On Cool runs cooling when
O/B engages (most cases), or On Heat runs heating
when O/B engages.
4. Touch Next. You will be returned to the Equipment
configuration menu.
Furnaces/Boilers
If you have a furnace or boiler installed:
1. Select the heating menu.
2. Configure the heater type:
Furnace: Optimizes ecobee3 for systems using forced
air
Boiler: Optimizes your ecobee3 for systems using
radiators or in-floor heat.
3. Touch Next. You will be returned to the Equipment
configuration menu.
Fans
If your furnace uses forced air, you may configure fan
operation:
1. Select Fan menu.
2. Select Fan operation:
Thermostat: Your ecobee3 thermostat controls the fan
during heat and cool cycles.
HVAC: Your equipment controls the fan during heat
and cool cycles (typical configuration).
3. Touch Next. You will be returned to the Equipment
configuration menu.
Humidifier
If you have a humidifier installed:
1. Select Accessory menu.
2. Select Humidifier.
3. Touch Next.
4. Select the type of humidifier you have: Evaporative or
Steam. If unsure, select Evaporative.
5. Touch Next. You will be returned to the Equipment
configuration menu.
Dehumidifier
If you have a dehumidifier installed:
1. Select Accessory menu.
2. Select Dehumidifier.
Loading ...
Loading ...
Loading ...