Loading ...
Loading ...
Loading ...
9
EN
Installation
Installation on Your Bike
7
Push the fixed lever into the left.
Push the fixed lever until the red circle on the right side
is hidden.
Push the fixed lever to the direction of the arrow.
Before riding with the device, make sure that the fixed lever •
red circle is hidden.
8
Adjust the angle of the device, and then tighten
the bracket.
If the device is not aligned to the center of the handlebars
or not horizontal to the stem, loosen the bolt and realign
the bracket.
After adjusting the angle, clamp the temporary joint bolt
and tighten the bracket.
Use a tool that can measure the torque to tighten the bolts.
Tightening torque: 1.2 N·m•
Front view•
Side view•
To detach the device
To detach the device from the handlebar mount, press the
fixed lever to the right, a red circle will appear next to the
device when unlocked.
Fixed lever
Pull back on the unlock lever on the bracket and lift the
device.
Unlock lever
Loading ...
Loading ...
Loading ...