Loading ...
Loading ...
Loading ...
51
EN
Settings
Sensor Settings
Sensor Calibration
A calibration menu is also displayed in sensor information when the sensor device type is [Pedaling Monitor L], [Pedaling
Monitor R], or [Power].
When the device type is [Pedaling Monitor L] or [Pedaling Monitor R]
■
The items shown below are displayed in sensor information.
Setting Item Description
Force Preview Tangential Direction
Force
Shows the tangential load.
Radial Direction Force Shows the radial load.
Calibration (Zero) Start Calibration Tap to start calibration.
Status Shows the calibration status (Unknown, Processing..., Process done).
Result Shows the calibration result (Success, Failure).
Data (Tangential) Shows tangential data obtained from calibration.
Data (Radial) Shows radial data obtained from calibration.
Error Code Displays the error code that indicates the cause when the sensor calibration is
failed.
For information about how to calibrate the Pedaling Monitor Sensor series SGY-PM910H/PM900H, refer to the Installation Manual or the •
User's Manual that comes with the Pedaling Monitor Sensor series SGY-PM910H/PM900H.
When the device type is [Power]
■
The items shown below are displayed in sensor information.
Setting Item Description
Calibration Start Calibration Tap the button to start PowerMeter calibration.
Status Shows the calibration status.
Result Shows the calibration result (Success, Failure).
Data Shows data obtained from calibration.
Auto Calibration Specify the auto calibration function when the Power Meter is compatible with
the auto calibration function.
Torque Displays the torque value when the Power Meter is programmed to output the
torque value.
Loading ...
Loading ...
Loading ...