Loading ...
Loading ...
Loading ...
,
Repairs should only be carried out by an authorized technician in
accordance with local and national safety regulations. Unauthorized repairs
could cause injury or appliance damage.
Problem Possible cause and solution
The appliance cannot
be turned on.
The circuit breaker has tripped.
^
Reset the circuit breaker (see data plate for the
correct fuse rating).
There may be a technical fault.
^
Disconnect the appliance from the electric power
supply for approx. 1 minute.
Reconnect the power and turn the appliance on.
If it still does not heat, contact Miele Technical Service.
The demo program is
set and the device
does not heat.
^ Turn the demo program off. Follow the instructions on
the display.
The fan can still be
heard after the
appliance has been
turned off.
The appliance is equipped with a fan that directs
vapors from the oven interior to the outside. The fan will
continue to run for a while after the appliance has been
turned off. It will stop automatically.
You can hear a noise
(humming) when the
appliance is turned on,
when it is operating,
and after it has been
turned off.
This noise does not indicate a malfunction or a defect.
This noise occurs when the appliance pumps water.
After moving to a new
location, the appliance
no longer switches
from the preheating
phase to the cooking
phase.
The boiling point of water has changed because the
altitude at the new location differs by at least 984 ft. (300
meters) from the old.
^
To adjust the boiling point of water, descale the
appliance (see "Cleaning and care - Descaling").
Frequently asked questions
88
Loading ...
Loading ...
Loading ...