Loading ...
Loading ...
Loading ...
Technical safety
~
Installation, repair and maintenance
work should be performed by a Miele
authorized service technician. Work by
unqualified persons could be
dangerous and may void the warranty.
~
Before installing the steam oven,
check for externally visible damage. Do
not operate a damaged appliance. A
damaged appliance is dangerous to
your safety.
~
Be certain your appliance is
properly installed and grounded by a
qualified technician. To guarantee the
electrical safety of this appliance,
continuity must exist between the
appliance and an effective grounding
system. It is imperative that this basic
safety requirement be met. If there is
any doubt, have the electrical system of
the house checked by a qualified
electrician.
~
Before installation make sure that
the voltage and frequency listed on the
data plate correspond to the household
electrical supply.
This data must match in order to avoid
damage to the appliance. If in doubt,
consult a qualified electrician.
~
Hardwiring the appliance should be
performed by a certified electrician in
compliance with all local and national
codes, and requirements.
~
Power bars and extension cords do
not guarantee the required safety of this
appliance (risk of fire). Do not use them
to connect the steam oven to the
electrical power supply.
~
To ensure safe operation, use the
steam oven only after it has been
properly installed.
~
This appliance is not to be used in
mobile locations such as ships.
~
Never open the outer casing of the
appliance. Tampering with electrical
connections or components and
mechanical parts is dangerous and
could cause machine damage.
~
Defective components should be
replaced by Miele original spare parts
only. Only with these parts can the
manufacturer guarantee the safety of
the appliance.
~
Do not repair or replace any part of
the appliance unless specifically
recommended in the manual. All other
servicing should be reffered to a
qualified technician
~
Do not operate any appliance with a
damaged cord or plug, or if the
appliance has been damaged in any
manner. Contact Miele’s Technical Ser
-
vice Department.
~
If the power cord is damaged, it
must be replaced with a special cord
(Type H 05 VV-F, PVC insulated),
obtainable from the Miele Customer
Service.
~
Before installation or service,
disconnect the appliance from the
power supply by either removing the
fuse, "tripping" the circuit breaker or
unplugging the unit. Pull the plug not
the cord.
IMPORTANT SAFETY INSTRUCTIONS
7
Loading ...
Loading ...
Loading ...