Loading ...
Loading ...
Loading ...
Application technology
35
Preparing the load
Remove coarse food residues from the dishware.
There is no need to rinse items under running water!
Tips
Ensure that no acid or solvent residues, especially hydrochloric
acid or chlorides, get inside the machine.
Do not wash items soiled with ash, sand, wax, grease or paint
in the dishwasher.
These substances will damage the dishwasher.
Load the dishware and utensils into their appropriate places in the
baskets, but be sure to observe the following instructions:
Load the dishware so that water can access all surfaces. This en-
sures that the items will be properly cleaned.
Load plates symmetrically in the upper and lower baskets with the
concave surfaces facing the center of the basket (as shown on the
following pages).
Do not place dishes or cutlery inside other pieces. They will cover
one another.
Make sure that all items are securely positioned.
Hollow items such as cups, glasses and pans, etc. should be
placed upside down in the baskets.
Tall and narrow hollow items should be placed in the center of the
basket if possible to ensure better water coverage.
Concave items such as mugs or bowls should be placed at an an-
gle so that the water can run off.
The spray arms must not be blocked by items which are too tall or
hang through the baskets. When in doubt, test for free movement
by manually rotating the spray arms.
Make sure that small items cannot fall through the holders in the
baskets. Small items should therefore be placed in the cutlery bas-
ket.
Loading ...
Loading ...
Loading ...