240V User Manual - Page 118

Loading ...

Plumbing

118

Connection to the drainage system

– The dishwasher drain contains a built-in non-return valve which

prevents dirty water from flowing back into the dishwasher via the

drain hose.

– Ideally, the dishwasher should be connected to a separate on-site

drainage system. If a separate connection is not available, we rec-

ommend connecting the dishwasher to a dual-chamber trap. The

on-site connection must be positioned between 12" and 40" (0.3m

and 1m) above the bottom edge of the dishwasher. If the connec-

tion is lower than the minimum height, the drain hose must be bent

to maintain a height of 12" (0.3m).

– The dishwasher is equipped with a 59" (1.5-m) long flexible drain

hose (clear width of 7/8" (22mm)). Clamps for connecting the hose

are included with the dishwasher.

– Do not shorten the drain hose! The hose can be extended by a con-

necting piece and an additional hose. The length of the drainage

line may not exceed 13' (4m).

– The drainage system must be able to handle a discharge rate of at

least 4.2g/min (16l/min).

 Make sure that there are no kinks in the hose, and that it is not

crushed or stretched.

Please also refer to the accompanying installation diagram!

Loading ...