Loading ...
Loading ...
Loading ...
Chapter 3 Operate the Oscilloscope with Buttons
43
Trigger source switching: Press , to switch the trigger source;
Adjust the trigger hold-off time: Open the trigger hold-off time adjustment frame, as shown in the figure below.
Turn the “X” knob for coarse adjustment, and turn the “Y” knob for fine adjustment.
Figure 3-2 Button Area
Bus threshold level adjustment and switching: is on, and the adjusting and switching methods are the
same as the trigger source and trigger level;
Trigger menu: Press to quickly open or close the trigger menu. For details, please refer to “
Chapter 6
Trigger System”.
Loading ...
Loading ...
Loading ...