Loading ...
Loading ...
Loading ...
216
When word is displayed in ASCII, 7-bit ASCII format is used. Valid ASCII characters are between 0x00 and
0x7F. To display in ASCII, at least 7 bits in the “Bus Configuration” must be chosen. If ASCII is chosen and the
data exceeds 0x7F, the data will be displayed in hexadecimal.
Click the baud rate setting box to open the baud rate selection column. If Custom is chosen, click to pop up the
virtual soft keyboard, select the bit to be modified, enter value, and click “Enter” on the virtual soft keyboard to
complete setting. The baud rate can be set from 1.2Kb/S to 8.000Mb/S. The virtual soft keyboard is shown in
Figure 12-5:
Loading ...
Loading ...
Loading ...