Loading ...
Loading ...
Loading ...
326
⚫ Check whether the trigger type is correctly selected;
⚫ Check whether trigger conditions are set correctly
⚫ Check whether signal source is working properly;
⚫ Check whether the channel is turned on;
⚫ Check whether the vertical scale factor is set correctly;
⚫ Check whether the instrument is in single-sequence waiting state for trigger
⚫ Tap to resample signal.
3. If the measured voltage amplitude is 10 times greater or smaller than the actual value:
⚫ Check whether the set attenuation factor of the channel is consistent with the attenuation factor of the
actually used probe.
4. There is a waveform display, but cannot be stable:
Loading ...
Loading ...
Loading ...