Loading ...
Loading ...
Loading ...
VideoXpert® Professional v 3.17 Operations Manual
C6601M-S | 06/22 99
8. (Optional) Click the checkbox to select or deselect Show camera name and time stamp in video
cells. Whether the user sharing video has names and timestamps enabled, the shared display
uses this preference to determine whether or not to display overlays.
9. (Optional) Click the checkbox to select or deselect Show Shared Display title bar.
10. (Optional)Click the checkbox to select or deselect Collapse space between cells.
11. In the Aspect Ratio area, click to select the radio button to either Maintain video aspect ratios or
Stretch video to fill cells.
12. (Optional) click the checkbox to select or deselect Enable hardware acceleration. Hardware
acceleration is enabled by default and should only be disabled if your workstation uses an
unsupported graphics chipset, or if you need to troubleshoot graphics issues that may result from
your graphics drivers and chipset.
Note:
Hardware acceleration of H.265 is supported on the Shared Displays VX-A3-SDD
and newer, and Enhanced Decoders VX-A3-DEC and newer.
13. (Optional) Click the checkbox to select or deselect Multi-System Access opens without initial
credentials (MSA). In MSAmode, VxOpsCenter will open with no VXSystems connected.
Credentials will be required when you connect to a VX system.
14. Click Apply.
15. Click OK.
Configuring VxOpsCenter Kiosk Mode (Optional)
You can run VxOpsCenter in kiosk mode, so that only VxOpsCenter Client will be run without access to
any other Windows applications.
l
The launcher and script are not included in the default installer of VxOpsCenter.
l
To run in kiosk mode, install VxOpsCenter on a machine with Windows 10 operating system using
VxOpsCenter 2.5 or later.
Caution: If not done properly, this process might result in a loss of critical data. In addition, the
process has several complex steps that, if not done properly, might result in unforeseen results.
Before beginning this process, ensure that all important data is backed up. If you are uncertain of
this process or are unfamiliar with the requirements, contact Product Support Services for
assistance.
To install and configure VxOpsCenter to run in kiosk mode:
1. Install VxOpsCenter v 2.5 or later on a Windows 10 PC.
2. Refer to the whitepaper Configure VxOpsCenter Kiosk mode.
3. From the white paper, download OpsCenterLauncher.zip and kiosk_mode_script_v2.ps1.
4. Unzip OpsCenterLauncher.zip and copy the files to the VxOpsCenter directory at c:\Program
Files\Pelco\VideoXpert\VxOpsCenter.
Note:
The path must be the same as the path specified in kiosk_mode_script_v2.ps1.
Note:
If the OpcCenter Client kiosk mode is updated to a newer version, copy the contents
of OpsCenterLauncher.zip to the folder again.
Loading ...
Loading ...
Loading ...