Loading ...
Loading ...
Loading ...
VideoXpert® Professional v 3.17 Operations Manual
C6601M-S | 06/22 22
5. Add and configure new analtyic events. See the Adding Video Analytics Events section of the
current version of the Camera Configuration Tool User Guide.
Follow these guidelines when configuring a camera and analytic events:
l
New events in VideoXpert will automatically correspond to the friendly names in CCT.
l
Some existing VideoXpert events have new default friendly names that are consistent with
CCTevent friendly names.
–
"No Object in Zone"is changed to "Object Not Present In Area".
–
"Object Count Limit Exceeded"is changed to "Objects Crossing Beam".
–
"Objects In Zone"is changed to "Objects In Area".
–
"Counterflow"is changed to "Direction Violated".
l
Some VideoXpert events have been deprecated.
–
Instead of "Loitering", use "Object Loitering".
–
Instead of "No Loitering", use "No Object Loitering".
After the events have been configured, the event description field in the VxToolbox Event page will list
information about the renamed or deprecated events and situations.
Understanding Counterflow zones (VxToolbox-only)
Counterflow alarms are triggered when the angle between an object’s trajectory and the wrong direction
is greater-than 110 degrees.
In Figure 1: Counterflow at 90 degrees, the Counterflow arrow is pointing at 90 degrees. Alarms trigger
when the angle is between 20 and 160 degrees.
Figure 1: Counterflow at 90 degrees
In Figure 2: Counterflow at 135 degrees,the Counterflow arrow pointing at 135 degrees. Alarms trigger
when the angle is between 155 and 245 degrees.
Loading ...
Loading ...
Loading ...