Loading ...
Loading ...
Loading ...
VideoXpert® Professional v 3.17 Operations Manual
C6601M-S | 06/22 101
Logging In
Open the VxOpsCenter application.
1. (Optional) If VxOpsCenter is configured to connect to a single system at a time, select the system
you want to access. See the section titled Understanding User Account Types.
2. (Optional)If VxOpsCenter is configured for multi-system access, select Multi-System Access
Mode from the drop-down list in the Connect to System field.
l
The first time you login to the system using Multi-System Access Mode, you will be asked to
select a system for authentication.
l
When you log in subsequently using Multi-System Access Mode, you will be connected to the
systems to which you've connected before.
l
If Mutli-System Access opens without initial credentials is enabled in VxToolbox, you can log
in using Multi-System Access Mode without using any credentials, but you will not be
connected to a VXsystem. When you connect to a VXsystem, credentials are required.
3. Enter your credentials.
4. Click Log In.
Understanding User Account Types
VxOpsCenter supports two types of users:
l
The Workstation Configuration account provides access to VxOpsCenter settings and allows you
to configure connections to VX systems. The configuration account should be reserved for
administrators, especially if multiple users will share the same workstation.
l
Logging in as a standard VX system user provides access to standard VX features - viewing
video, controlling cameras, etc.
Note: If multi-system access is enabled, only Workstation Configuration accounts are supported.
If your user account is both the Workstation Configuration account and a VX system user, VxOpsCenter
will log you into applicable VX systems and allow access to workstation configuration settings.
When you log in as a standard VX system user, the system will only populate sources and options you
have permissions to see (determined by the roles assigned to your user account). If a system or camera
does not appear when you log in, then the system or camera might be offline, or you might lack the
appropriate permissions.
Setting Your Display Language
The localization presented by the VxOpsCenter client is based on the Region and Language settings
within Windows.
Note: You must have the appropriate Windows language pack to expose display languages in the
VxOpsCenter Client.
To set or change your VxOpsCenter display language:
1. Close the VxOpsCenter software if it is already running.
2. Click Start (if necessary), and then search for and click to open Language settings.
Note
:These steps might be different, based on the operating system you are using.
Loading ...
Loading ...
Loading ...