Loading ...
Loading ...
Loading ...
VideoXpert® Professional v 3.17 Operations Manual
C6601M-S | 06/22 45
Creating a Bump on Alarm Recording Schedule
A Bump on Alarm records continuous reduced frame rate (I-Frame only) video during normal situations,
and records full frame rate video during an alarm or event. The video timeline for cameras set to record
using a Bump on Alarm schedule shows a small green bar for continuous recording and a larger blue bar
during event- or alarm-driven recording.
To configure a Bump on Alarm schedule:
1. Click the Recording tab.
2. At the top of the left panel, click Schedules.
3. In the What to Record (left) panel, click to select the recording group for which create a recording
schedule.
4. In the When to Record (center) panel, click to highlight the schedule to which you will add the
bump on alarm behavior.
5. Create a schedule for an alarm- or event-triggered recording:
a. In the Recording Behaviors (right) panel, click the Create a new Recording Behavior icon
( ). The Recording Mode and Trigger will already be set to Event-Triggered Recording (Full
Frame Rate).
b. Select a value in the Start recording field, either by typing-in a number or selecting one using
the up and down arrows.
c. Click to select the event associated with the recording.
d. (Optional)If present, click to select or deselect the checkbox for Record all cameras in the
RecordingGroup.
e. In the Stop recording table, enter a value in the seconds field, either by typing-in a number or
selecting one using the up and down arrows, and then click to select the radio button for
Event that triggers recording or Next opposite event.
6. Click Add & Create Another or Add.
7. If you clicked Add & Create Another, repeat steps 5-6.
8. Repeat steps 3-7 for each recording schedule to create.
Editing a Recording Group
1. Click the Recording tab.
2. At the top of the left panel, click Schedules.
3. In the What to Record (left) panel, click to select the recording group to edit.
4.
Click the Edit selected Recording Group icon ( ) to open the Edit Recording Group window.
a. (Optional) Enter a new value in the Name of Recording Group field.
b. Click to select the radio button for All Resources or Selected Resources.
c. If you selected Selected Resources, in the Add / Remove Cameras from Group table, click to
select the checkboxes for the sources to include in the recording group; click to deselect the
checkboxes for the sources to exclude from the recording group.
d. Click Save.
Loading ...
Loading ...
Loading ...