Loading ...
Loading ...
Loading ...
VideoXpert® Professional v 3.17 Operations Manual
C6601M-S | 06/22 88
4. If you are going to control a monitor remotely, assign a number to the monitor. To do so:
a.
Click the Configure Monitors icon ( ) to the right of Configure Monitors to open the
Configure Monitors window for the workstation.
b. Follow the instructions for assigning a number to each monitor to control. For
example:assign a number to any monitor that will be included on a shared display.
5. (Optional) Click the checkbox to select or deselect Enable hardware acceleration. Hardware
acceleration is enabled by default and should only be disabled if your workstation uses an
unsupported graphics chipset, or if you need to troubleshoot graphics issues that may result from
your graphics drivers and chipset.
Note:
Hardware acceleration of H.265 is supported on the Shared Displays VX-A3-SDD
and newer, and Enhanced Decoders VX-A3-DEC and newer.
6. (Optional) Click the checkbox to select or deselect Multi-System Access opens without initial
credentials (MSA). In MSAmode, VxOpsCenter will open with no VXSystems connected.
Credentials will be required when you connect to a VX system.
7. Click Apply to save your workstation configuration settings.
Loading ...
Loading ...
Loading ...