Loading ...
Loading ...
Loading ...
VideoXpert® Professional v 3.17 Operations Manual
C6601M-S | 06/22 165
people who want to enter the region can see the current occupancy count and know whether they can
enter the region.
To launch Occupancy Counting and connect it to a VideoXpert System:
1. Ensure that you have created counting lines on the VideoXpert system to mark entrance and exit
points of each region for which the system will be counting occupancy. Refer to the section titled
Configuring a Camera for the Pelco Advanced Analytics Suite in the VxToolbox section of this
manual.
2. Launch Occupancy Counting to open the Occupancy Counting Configuration window.
3. Connect to a VideoXpert system. To do so:
a. Enter the appropriate values in the Host, Port, Username, and Password fields.
b. Click Save.
c. If any of the information is incorrect, an error message displays. Correct the information, and
then click Save.
d. When the Connected message is displayed, click Continue.
To create a new region:
1.
In the Regions (left) panel, click the Create a new region icon ( ).
2. In the [region name] (right)panel:
a. Type a string in the Region Name field.
b.
Under Counters, click the Edit the "in" counters icon ( ).
c. In the Edit "In"Counters for Region dialog box, click to select the checkboxes for the
Available Lines (right panel)to add to the Selected Lines (left panel), and then click Save.
d.
Under Counters, click the Edit the "out" counters icon ( ).
e. In the Edit "Out"Counters for Region dialog box, click to select the checkboxes for the
Available Lines (right panel)to add to the Selected Lines (left panel), and then click Save.
f.
Under Event Thresholds, click the Edit the regions' thresholds icon ( ).
A threshold is used to trigger an event that will be injected into VideoXpert. This allows you to
set up associated rules.
g. In the Edit Event Thresholds for Region dialog box:
i.
Click the Create a new threshold icon ( ).
ii. Click to select Over or Under in the Trigger if capacity is drop-down menu.
iii. Type in a number for the capacity trigger.
iv. Type a string in the Event label field.
v. Create any other thresholds needed for the region.
vi. Click Save.
h. (Optional) View the Total In and Total Out values. Click Reset Totals to reset both the Total
In and Total Out to zero.
i. (Optional)View the maximum Occupancy. The denominator is the maximum capacity of the
region, and is shown on the web page.
Loading ...
Loading ...
Loading ...