Loading ...
Loading ...
Loading ...
VideoXpert® Professional v 3.17 Operations Manual
C6601M-S | 06/22 30
l
Click to select or deselect the Secondary Stream Dynamic GOPEnabled checkbox. If
you selected this checkbox, enter a value in the Secondary Stream Max GOPLength
field—either by typing-in a number or selecting one using the up and down arrows.
l
Click to select or deselect the Tertiary Stream Dynamic GOPEnabled checkbox. If you
selected this checkbox, enter a value in the Tertiary Stream Max GOPLength field—
either by typing-in a number or selecting one using the up and down arrows
e. If you are updating the primary, secondary, or tertiary stream, in the Settings Editor dialog
box, enter correct values into the fields. For example:Type in or select from the drop-down
menus a stream Name, Encoding, Profile, GOP, Resolution, Max Bitrate, Frame Rate,
Multicast Address, and Multicast Port.
f. Click Save Changes.
8. (Optional) To view and update basic Analytics (motion detection, etc.), if present:
a. Click to expand Analytics.
b. Continue clicking to expand individual items listed under Analytics.
c.
If there is a setting to edit, click the Edit icon ( ) to the right of the information.
d. In the Edit [analytics name] Settings for [device name] dialog box:
–
Select the appropriate radio buttons. If you chose On Camera, click Edit camera
settings in browser, make the appropriate changes, exit the browser window, and then
click Done.
–
If you chose On Server, use the slider bar to select a value for Contrast Sensitivity; use
the icons under the device image to view information Live, Jump Back 30 Seconds ( ),
Jump to Specific Date/Time ( ), or Jump to Now ( ).
–
If you chose Off, the analytics will be disabled.
–
When you are finished in this dialog box, click Done.
9. (Optional)To view and update the Pelco Advanced Analytics Suite, if present on the camera:
a. In the right panel, click to expand Analytics,and then to the right of
ADVANCEDANALYTICS, click the Edit icon ( ).
b. In the Configure Advanced Analytics for [device name] dialog box, configure the zones. See
the instructions in the section titled Configuring a Camera for Analytics to update the
configuration.
10. (Optional)To view and update Alarms, if present:
a. Click to expand Alarms.
b. Continue clicking to expand individual items listed under Alarms. All available alarm
information is listed, and might include:state, name, description, ID, and type. Information
varies based on the alarm type.
c.
Click the Edit icon ( ) to the right of the alarm item to update.
d. In the Settings Editor dialog box, enter all appropriate values. For example: type values in the
Name and Description fields, and then select a value from the drop-down menu in the Type
field.
e. Click Save Changes.
Loading ...
Loading ...
Loading ...