Loading ...
Loading ...
Loading ...
VideoXpert® Professional v 3.17 Operations Manual
C6601M-S | 06/22 124
Watching Video
The Sources section of Mission Control shows the list of video and audio sources you are authorized to
access.
If a particular source is online but does not appear in your source list, try refreshing the list. Sources that
come online after you log in or perform a search will not appear until you refresh the list. If the source still
does not appear, request access to the source from your administrator.
When watching live video, cells 1/4 the size of the tab or larger will use the primary stream from a video
source. Cells smaller than 1/4 the size the tab will use the secondary or tertiary video stream. In a 2x2
layout, for example, all cells will use the primary stream. In a 1+12 tab, the largest cell will use the primary
stream and the other twelve will use the secondary or tertiary stream.
All-frame reverse playback enables frames to be displayed at up to eight times the normal speed. This
will make the playback smoother.
When playing forward or reverse at high speeds (greater than +/-8X), only iFrames will be shown. At
lower speeds, all frames will be shown whenever possible, but for reverse playback, some additional
limitations apply:
l
For systems that use enhanced decoders, this is available for up to four streams per monitor.
l
For systems with multiple monitors on a single host, this is available for up to four streams total on
the host PC.
l
Reverse playback may be noticeably choppy for cameras configured with dynamic-GOP-length (a
smart-compression feature) or for cameras with fixed-length, but unusually long GOPs. All
cameras should work well with fixed-length GOPs up 15, or up to 30 for cameras with resolution
less than 4K.
To watch live or recorded video, in Mission Control:
1. (Optional)If VxOpsCenter is configured for multi-system access, you can shorten the list of
sources available in the Content panel, and then limit the systems with which you are working:
a. In Mission Control, click Systems.
b. Click Filter to expand the filter panel.
c. If there is an active filter, clear it.
d. Click to select and deselect the systems to access.
The items in Sources page of the Content panel are updated immediately.
See the section titled Working With Systems.
2. Click Content, and then click Sources.
3. Find the source you want to watch. To use the Filter to search for sources:
a. Click Filter to expand the filter panel.
b. Type a value in the Filter by field or select a saved filter from the Advanced Filter Options
drop-down menu.
c. (Optional)Click to expand Advanced Filter Options, and then refine the filter using the
Tags, Online, Recording, On Screen, and Storage filters.
d. (Optional) To save a filter, under Advanced Filter Options, in the Saved Filter Sets drop-
down menu, click Save Filter.
Loading ...
Loading ...
Loading ...