Loading ...
Loading ...
Loading ...
VideoXpert® Professional v 3.17 Operations Manual
C6601M-S | 06/22 143
2. Move the camera to the position you want to mark as a preset.
3. Right click, select Preset, and then click Add Preset.
4. Enter or select a number for the preset. The maximum number for the preset is determined by the
camera or encoder on which you are creating a preset. Some cameras have reserved values that
you cannot use to set a new preset.
5. Click OK.
Editing Presets
Some presets are pre-defined by the camera or encoder; you cannot edit these presets.
Note: For Pelco NET5500 and NET5400 series encoders, you can edit presets, but you cannot
create or delete presets.
1.
In the upper left corner of the cell, click the Activate Digital PTZ Mode icon ( or ) or the
Activate PTZ Mode icon ( ), whichever is present.
2. Position the camera to the location that you will make the preset.
3. Right-click in the cell, click Presets, and then hover over the preset you want to change.
4.
Click the Reposition the preset to the current PTZ spacial coordinates icon ( ).
5. Click OK.
Deleting Presets
Some presets are pre-defined by the camera or encoder; you cannot delete these presets.
Note: For Pelco NET5500 and NET5400 series encoders, you can edit presets, but you cannot
create or delete presets.
1.
In the upper left corner of the cell, click the Activate Digital PTZ Mode icon ( or ) or the
Activate PTZ Mode icon ( ), whichever is present.
2. Right click in the cell, click Presets, and hover over the preset you want to delete.
3.
Click the Delete icon ( ).
4. Click Delete.
Using Quick Export
Use Quick Export to export a recording of one or more sources using predefined or custom dates and
times.
To use Quick Export from the Sources panel:
1. Right-click the source, and then click Quick Export.
2. Click to select Previous 5 minutes, Previous Minute, or Custom.
3. If you selected Custom, in the Custom QuickExport dialog box, enter clip start and end dates and
times either by typing them in or selecting them from the calendar and/or clock in each field. As
you change the dates and times, the export size estimate below the start and end times fields is
updated.After you have entered the correct dates and times, click OK.
4. In the Export Playlist As dialog box:
Loading ...
Loading ...
Loading ...