FLUKE TIR4/FT-20 User Manual for the Fluke TiR4 60Hz Thermal Imaging Camera, 76800 Pixels 420 x 240

Loading ...

Camera Care

Charging the Batteries

8-3

The Battery tab within the Camera Info window shows the power source,

remaining battery charge level, and battery manufacturer, serial number, and

number of discharge cycles.

To view the Battery tab information:

1. Tap F.

2. Use the mouse controller to position the pointer over Camera Info on the

popup menu and tap E.

3. Position the pointer over the Battery tab and tap E.

4. Tap

to return to scan target mode.

Charging the Batteries

Your Camera comes with a battery charger that works with 100 to 240 V AC

input voltage and 50 or 60 Hz input frequency. The charger has a recalibration

feature to maintain correct capacity monitoring. When using battery power, a

battery symbol appears in the far right side of the camera display screen task

bar. The remaining charge capacity is indicated as shown in Table 8-1.

Table 8-1. Remaining Battery Charge Indicators

Indicator Battery Power Remaining

Green 25% to 100%

Yellow Less than 25%

Flashing/Solid Red Approximately 5 minutes until camera

powers off.

Use the mouse controller to position the pointer over the battery icon. Press

E to obtain an estimate of the remaining battery charge and camera runtime.

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE TIR4/FT-20 TiR4 60Hz Thermal Imaging Camera, 76800 Pixels 420 x 240