Loading ...
Loading ...
Loading ...
Digital Oscilloscope Series
214
Obsolete
PEAK_DETECT | PDET
Command /Query
DESCRIPTION
The PEAK_DETECT command set the switch of
Peak Detect acquisition.
The PEAK_DETECT? query returns the current
status of Peak Detect acquisition.
COMMAND SYNTAX
PEAK_DETECT <state>
<state>:={ON,OFF}
QUERY SYNTAX
PEAK_DETECT?
RESPONSE FORMAT
PEAK_DETECT <state>
EXAMPLE
The following command set Peak Detect
acquisition on.
Command message:
PDET ON
RELATED COMMANDS
ACQW
Note:
The table below shows the availability of command in each oscilloscope series.
Model
Valid?
SDS1000CFL
yes
SDS1000A
yes
SDS1000CML+/CNL+/DL+/E+/F+
yes
SDS2000X
yes
SDS1000X
yes
SDS1000X-E
no
Loading ...
Loading ...
Loading ...