Loading ...
Loading ...
Loading ...
Digital Oscilloscope Series
200
Obsolete
AUTO_CALIBRATE | ACAL
Command /Query
DESCRIPTION
The AUTO_CALIBRATE command is used to
enable or disable the quick calibration of the
instrument.
The quick calibration can be disabled by sending
the command ―ACAL OFF‖. The query
―*CAL?‖ can be set to fully calibrate the
oscilloscope.
The AUTO_CALIBRATE? query returns
whether quick-calibration is enabled.
COMMAND SYNTAX
AUTO_CALIBRATE <state>
<state>:={ON,OFF}
QUERY SYNTAX
AUTO_CALIBRATE?
RESPONSE FORMAT
AUTO_CALIBRATE <state>
EXAMPLE
The following command disables a quick
calibration.
Command message:
ACAL OFF
RELATED COMMANDS
*CAL?
Note:
The table below shows the availability of command in each oscilloscope series.
Model
Valid?
SDS1000CFL
yes
SDS1000A
no
SDS1000CML+/CNL+/DL+/E+/F+
no
SDS2000X
yes
SDS1000X
no
SDS1000X-E
no
Loading ...
Loading ...
Loading ...