Loading ...
Loading ...
Loading ...
Digital Oscilloscope Series
117
PASS/FAIL
PF_FAIL_STOP | PFFS
Command/Query
DESCRIPTION
The PF_FAIL_STOP command sets the switch
of the ―stop on fail‖ function. This is the same as
pressing the ―Stop on Fail‖ button on the menu
of PASS/FAIL on the front panel.
The PF_FAIL_STOP? query returns the state of
the ―stop on fail‖ function.
COMMAND SYNTAX
PF_FAIL_STOP <state>
<state>:={ON,OFF}
• ON — To monitor the failure waveform, the
oscilloscope stops testing and enters the "STOP"
state. At this point, the screen displays the last
statistical result.(if the display is already open)
• OFF — To monitor the failure waveform, the
oscilloscope will continue to test and update the
statistics on the screen immediately.
QUERY SYNTAX
PF_FAIL_STOP?
RESPONSE FORMAT
PF_FAIL_STOP <state>
EXAMPLE
The following command sets ―stop on fail‖ to
―off‖.
Command message:
PFFS OFF
Note:
The table below shows the availability of command in each oscilloscope series.
Model
Valid?
SDS1000CFL
no
SDS1000A
no
SDS1000CML+/CNL+/DL+/E+/F+
no
SDS2000X
no
Loading ...
Loading ...
Loading ...