Loading ...
Loading ...
Loading ...
Digital Oscilloscope Series
112
PASS/FAIL
PF_BUFFER | PFBF
Command/Query
DESCRIPTION
The PF_BUFFER command sets the output
mode when the test fails. This is the same as
pressing the ―Output‖ button on the menu of
PASS/FAIL on the front panel.
The PF_BUFFER? query returns the current
output mode of the pass/fail.
COMMAND SYNTAX
PF_BUFFER <state>
<state>:= {ON,OFF}
• ON — The statistical result is displayed when
the failed waveform is detected, and the buzzer
alarm. (not related to the state of the sound
switch)
• OFF — The statistical result is displayed
when the failed waveform is detected, but the
buzzer does not alarm.
QUERY SYNTAX
PF_BUFFER?
RESPONSE FORMAT
PF_BUFFER <state>
EXAMPLE
When the PASS/FAIL function is on, the
following command sets ―output‖ to ―ON‖.
Command message:
PFBF ON
Note:
The table below shows the availability of command in each oscilloscope series.
Model
Valid?
SDS1000CFL
no
SDS1000A
no
SDS1000CML+/CNL+/DL+/E+/F+
no
SDS2000X
no
SDS1000X
no
SDS1000X-E
yes
Loading ...
Loading ...
Loading ...