Loading ...
Loading ...
Loading ...
Digital Oscilloscope Series
113
PASS/FAIL
PF_CREATEM | PFCM
Command
DESCRIPTION
The PF_CREATEM command creates a pass/
fail test rule around the current selected channel,
using the horizontal adjustment parameters and
the vertical adjustment parameters defined by the
PFST commands.
Note:
This command is valid only if the pass / fail test
function has been opened (PFEN) and is not in
operation (PFOP).
COMMAND SYNTAX
PF_ CREATEM
EXAMPLE
The following steps create the mask of the
pass/fail.
Step 1: Send command to set the Pass/Fail test
enable.
Command message:
PFEN ON
Step 2: Send command to stop the operation.
Command message:
PFOP OFF
Step 3: Send command to create the rule.
Command message:
PFCM
RELATED COMMANDS
PFST
PFSC
PFEN
PFOP
Loading ...
Loading ...
Loading ...