Loading ...
Loading ...
Loading ...
Digital Oscilloscope Series
211
Obsolete
FILTER | FILT
Command /Query
DESCRIPTION
The FILTER command enables or disables filter
of the specified trace.
The FILTER? query returns whether the filter of
specified trace is enabled.
COMMAND SYNTAX
<channel>:FILTER <state>
<channel>:={C1,C2,C3,C4}
<state>:={ON,OFF}
QUERY SYNTAX
<channel>:FILTER?
RESPONSE FORMAT
<channel>:FILTER <state>
EXAMPLE
The following command enables the filter of
Channel 1.
Command message.
C1:FILT ON
RELATED COMMANDS
FILTS
Note:
The table below shows the availability of command in each oscilloscope series.
Model
Valid?
SDS1000CFL
yes
SDS1000A
yes
SDS1000CML+/CNL+/DL+/E+/F+
yes
SDS2000X
no
SDS1000X
no
SDS1000X-E
no
Loading ...
Loading ...
Loading ...