Loading ...
Loading ...
Loading ...
34 (800) 449-8691
Troubleshoong Guide
Problem
The cooktop or the cooking zone
does not start:
• The appliance is badly connected to the electrical network.
• The safety fuse is cut o.
• The lock funcon is acvated.
One or all cooking zone(s) are cut
o:
• The safety system funconed. This system works when you forgot to switch o the cook-
ing zone.
• The pan is empty and its boom overheated.
• The cooktop also has an automac reducon of the power level (see Power Boost func-
on) and is switched o automacally when there is a possibility of overheang.
The display area shows:
• There is no pan on the cooking zone.
• The pan is not compable with inducon.
• The pan’s boom diameter is too small.
The display area shows:
• The electronic system is defecve.
• Disconnect and reconnect the cooktop.
• Call service.
The venlaon system is sll
working aer switching o the
cooktop:
• This is not a failure; the fan connues to protect the electronic device.
• The fan stops automacally.
The automac cooking system
does not start:
• The cooking zone is sll hot.
• The highest Power Boost level is set.
The display area shows or
• See chapter “Keep warm “.
The display area shows [ E2 ] :
• The cooktop is overheated. Let it cool and then turn it on again.
The display area shows [ E8 ] :
• The air inlet of the venlator is obstructed. Release it.
The display area shows [ U400 ] :
• The cooktop is not connected to the network. Check the connecon and reconnect the
cooktop.
The display area shows [ Er47 ] :
• The cooktop is not connected to the network. Check the connecon and reconnect the
cooktop.
Convecon fan does not turn:
• Fan guard is obstructed or clogged.
• No electrical power to the unit.
H
O
T
Loading ...
Loading ...
Loading ...