Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/26211658-bsir30/bg10.png)
16 (800) 449-8691
Installaon Instrucons
Step 6 — Final Install
Slide the appliance into the opening.
Step 7 — Level the Range
Your range has legs you can adjust between 2 1/2” to 3
1/4” (63.5 mm to 82.6 mm) up or down.
When leveling your range, use a 8” to 10” (200 mm to 250 mm)
carpenter level in the center of the top, front-to-back, and side-
to-side. The legs are screwed partway in, so you will need to li
the range a bit and turn the leg in (or out) a few turns to adjust
its height.
Aer adjusng each leg, make sure the range does not rock. If
the range is sll unsteady, connue adjusng each leg outward
to lengthen or inward to shorten unl the range is level front-
to-back and side-to-side.
Step 8 — Reaach the Drop-Down Door
1. Hold the door with the handle side facing the ground.
2. Align and insert the door hinges with the openings on the
range.
3. Push up the latch at the top of each hinge to secure each
hinge.
4. The drop-down door should close easily.
Push up on the latch to secure
Three Wire Installaon
1. Move the metal ground strap to posions N and G as
shown below.
2. Connect the white/neutral to G
3. Connect red to L1
4. Connect black to L2.
Important: all electrical wiring should be free and clear. Wires
or cables should not be pinched or otherwise obstructed.
5. Tighten the screws on the strain relief and aach the
electrical cover.
6. If the power cord (supplied with Canadian models) is used,
locate the electrical outlet and plug the range.
Loading ...
Loading ...
Loading ...