Loading ...
Loading ...
Loading ...
66
type: the induction type output is usually a sine wave, there are missing teeth on the disk, and the sine wave will be
missing in the missing teeth; this kind of sensor is generally 2-wire; the Hall type output is usually a square wave .
Generally 3-wire, power, signal, and ground. Use a BNC to banana cable, one end is connected to channel 1 of the
oscilloscope, the other end is grounded with the black plug, and the red connector is connected to the signal line of
the camshaft sensor with a needle.
Use the ATO oscilloscope to test the crankshaft position sensor, the specific operation is shown in Figure 3-16:
Loading ...
Loading ...
Loading ...