Loading ...
Loading ...
Loading ...
Chapter 12 Serial Bus Trigger and Decode (Optional)
335
d) Remote frame/data frame ID — trigger on remote frame or data frame that matches set ID. Remote
frame/data frame ID configuration is the same as the remote data frame ID configuration;
e) Data frame ID and data ID — trigger on data frame that matches set ID and data. The configuration method
is the same as the remote frame ID configuration;
f) Error frame — trigger on CAN error frame;
g) All errors — trigger when there is any error in format or activity;
h) Ack error — trigger on recessive (high) Ack position;
i) Overload frame — trigger on CAN overload frame.
CAN serial decode
Ch1 is connected to measured signal. The idle level is high and the baud rate is 1Mb/s; the Trigger mode is the
frame start. Please follow these steps:
(1) Tap S1 to open the decode channel, and click S1 again to open the bus configuration menu;
Loading ...
Loading ...
Loading ...