Loading ...
Loading ...
Loading ...
Chapter 17 Troubleshooting
417
Chapter 17 Troubleshooting
1. If the oscilloscope does not start up at power on, please follow steps below:
Check the power cord to verify whether it has been connected properly and whether the power supply is
normal;
Check the power on/off buttons to ensure it has been pushed, and if you are using battery, check whether
the battery is in good condition;
Check the Power-off lock on the side of oscilloscope;
Contact Micsig if the problem persists, and we will provide service to you.
2. If acquired waveforms do not display on the screen when the signal source is connected, please follow
the steps below:
Check whether the probe is connected correctly in the BNC socket;
Check whether the probe is connected correctly in the signal source;
Loading ...
Loading ...
Loading ...