Loading ...
Loading ...
Loading ...
English _13
● OVERVIEW
AT A GLANCE
SNP-3120
Item Description
Main unit Main unit includes the lens, switch board, PCB boards and screws.
b
Dome Cover Dome cover for the lens and unit protection.
c
Audio Audio I/O port.
Alarm In / Out
terminals
Used to connect alarm in/out terminal block.
Video, RS-485, Power Used to connect monitor, RS-485 device or power.
ID setup switch Used to setup the camera ID or communication protocol.
Screw Hole Used to fix the camera to the wall or ceiling.
Reset Button
Resets the camera settings to the default. Press and hold it for about 5
seconds to turn off the system indicator and restart the system.
J
If you reset the camera, the network settings will be adjusted so that
DHCP can be enabled. If there is no DHCP server in the network, you
must run the IP Installer program to change the basic network settings
such as IP address, Subnet mask, Gateway, etc., before you can
connect to the network.
Network port Used to connect a PoE or LAN cable.
❖
Loading ...
Loading ...
Loading ...