Loading ...
Loading ...
Loading ...
DS-K1T8003 Series Fingerprint Access Control Terminal User Manual
83
7. Set available time for the target attendance status.
1) Move the cursor on the target time and the enable checkbox will display.
2) Check the checkbox and set the available time.
3) Click anywhere on the page to confirm the settings. The configured time will be displayed in
white.
8. Set shortcut key from the drop-down list for the attendance status.
9. Click Save.
The attendance status will be valid within the configured time duration.
Result
Enter the device initial page, the current attendance mode will be displayed on the page. If you do
not select a status, the authentication will be marked as the configured attendance status
according to the configured time. If you press the key on the keypad, and select a status to take
attendance, the authentication will be marked as the selected attendance status.
Example
If set the Up key as check in and the Down key as check out, and set the check in's time as Monday
08:00, and check out's time as Monday 17:00, the valid person's authentication before 17:00 on
Monday will be marked as check in. And the valid person's authentication after 17:00 on Monday
will be marked as check out.
7.6 Configure Linkage Actions for Access Control
You can configure different linkage actions for the event detected by the access control device.
After that, linkage actions will be triggered once the event happens. This mechanism is used for
notifying the security personnel the event, or triggering automatic access control in real time.
Two types of linkage actions are supported:
● Client Actions: When the event is detected, it will trigger the actions on the client, such as the
client making an audible warning..
● Device Actions: When the event is detected, it will trigger the actions of a specific device, such
as buzzing of a card reader and, opening/closing of a door, ..
7.6.1 Configure Client Actions for Access Event
You can assign client linkage actions to the event by setting up a rule. For example, when the
event is detected, an audible warning appears to notify the security personnel.
Steps
Note
The linkage actions here refer to the linkage of the client software's own actions such as audible
warning, email linkage, etc.
Loading ...
Loading ...
Loading ...