Loading ...
Loading ...
Loading ...
DS-K1T8003 Series Fingerprint Access Control Terminal User Manual
119
You can set the face picture parameters when authenticating.
4. Click Save.
8.13 Configure Supplement Light Parameters
You can turn on or off the supplement light. You can also adjust the supplement light brightness.
Steps
1. Click Maintenance and Management → Device to enter the device list.
2. Press CTRL and click to enter the remote configuration page.
3. Click Other → Supplement Light Parameters to enter the Configuring Supplement Light
Parameters page.
4. Select a supplement light No. from the drop-down list.
Note
Light 1 refers to white light and Light 2 refers to IR light.
5. Select a supplement light mode from the drop-down list.
6. Optional: If the supplement light mode is Auto, you can set the supplement light brightness.
7. Click Save to save the settings.
8.14 Set Room No.
Set the device type, community No., building No., floor No., and unit No., and room No.
Click Maintenance and Management → Device to enter the device list.
Press CTRL and click to enter the remote configuration page.
Click Other → Device Room No. and Set the device type, community No., building No., floor No.,
and unit No., and room No.
8.15 Configure Video and Audio Parameters
You can set the device camera's image quality, resolution and other parameters.
Steps
1. Click Maintenance and Management → Device to enter the device list.
2. Press CTRL and click to enter the remote configuration page.
3. Click Image → Video & Audio to enter the settings page.
4. Set the device camera's parameters, including the stream type, the bitrate type, the video
quality, the frame rate, the audio encoding type, the video type, the bitrate, the resolution, and
the I frame interval.
Loading ...
Loading ...
Loading ...