Loading ...
Loading ...
Loading ...
DS-K1T8003 Series Fingerprint Access Control Terminal User Manual
7
Chapter 4 Installation
4.1 Install with Gang Box
Install device on the wall with gang box.
Steps
1. Install the gang box on the wall.
Note
Make sure the gang box screw holes match the mounting plate's. The gang box in the picture is
for reference only.
2. Fix the mounting plate on the gang box with 2 supplied screws.
Figure 4-1 Mounting Plate
3. Route the device cable through the cable hole of the mounting plate, wire the cables, and insert
the cables in the gang box.
Loading ...
Loading ...
Loading ...