Hikvision DS-K1T8003F K1T8003 Value Series Fingerprint Time Attendance Terminal

User Manual - Page 131

For DS-K1T8003F.

PDF File Manual, 149 pages, Read Online | Download pdf file

DS-K1T8003F photo
Loading ...
Loading ...
Loading ...
DS-K1T8003 Series Fingerprint Access Control Terminal User Manual
117
4. Enter the SSID name or you can click Select... to select a network.
5. Optional: Configure the working mode, encryption mode, encryption type, authentication
mode, key length, key type, password, and key according to your preference.
6. Optional: Set WLAN parameters.
1) Click Network Wi-Fi WLAN.
2) Select the NIC Type.
7. Optional: Check Enable DHCP to and the system will assign the network information
automatically. Or disable the DHCP function and set the IP address, the subnet mask, the
default gateway, the MAC address, the DNS1 IP Address, and the DNS2 IP address maually.
8. Click Save.
8.11 Configure SIP Parameters
Set the master station's IP address and the SIP server's IP address. After setting the parameters,
you can communicate among the access control device, door station, indoor station, master
station, and the platform.
Note
Only the access control device and other devices or systems (such as door station, indoor station,
master station, platform) are in the same IP segment, the two-way audio can be performed.
Click Maintenance and Management Device to enter the device list.
Press CTRL and click to enter the remote configuration page.
Click Network Linked Network Configuration and set the master station's IP address and SIP
server's IP address.
Click Save.
8.12 Configure Face Picture Parameters
Steps
1. Click Maintenance and Management Device to enter the device list.
2. Press CTRL and click to enter the remote configuration page.
3. Click Other Face Picture Parameters to enter the Configuring Face Picture Parameters page.
Min. Detection Width (Close to)
When the distance between the camera and the user is short, the parameter represents the
minimum percentage of the facial width in the total width of the recognition area.
The actual percentage should be larger than the configured value when face picture
authentication. In this condition, the device will not detect other parameters.
Loading ...
Loading ...
Loading ...