Loading ...
Loading ...
Loading ...
DS-K1T8003 Series Fingerprint Access Control Terminal User Manual
116
2. Press CTRL and click to enter the remote configuration page.
3. Click System → Security.
4. Select the encryption mode in the dropdown list.
5. You can select Compatible Mode or Encryption Mode.
Compatible Mode
The user information verification is compatible with the old client software version when
logging in.
Encryption Mode
High security level during the user information verification when logging in.
6. Optional: Check Enable SSH.
7. Click Save.
8.8 Configure Network Parameters
Steps
1. Click Maintenance and Management → Device to enter the device list.
2. Press CTRL and click to enter the remote configuration page.
3. Click Network → General.
You can configure the NIC type, the IPv4 address, the subnet mask (IPv4), the default gateway
(IPv4), MTU, and the device port.
4. Click Save.
8.9 Configure Advanced Network
Click Maintenance and Management → Device to enter the device list.
Press CTRL and click to enter the remote configuration page.
Click Network → Advanced Settings and you can configure the DNS IP address 1 and the DNS IP
address.
Click Save to save the settings.
8.10 Configure Wi-Fi
Steps
1. Click Maintenance and Management → Device to enter the device list.
2. Click to enter the remote configuration page.
3. Click Network → Wi-Fi.
Loading ...
Loading ...
Loading ...