Hikvision DS-K1T8003F K1T8003 Value Series Fingerprint Time Attendance Terminal

User Manual - Page 94

For DS-K1T8003F.

PDF File Manual, 149 pages, Read Online | Download pdf file

DS-K1T8003F photo
Loading ...
Loading ...
Loading ...
DS-K1T8003 Series Fingerprint Access Control Terminal User Manual
80
3. Select an access control device in the device list and click M1 Card Encryption to enter the M1
Card Encryption page.
4. Set the switch to on to enable the M1 card encryption function.
5. Set the sector ID.
The sector ID ranges from 1 to 100.
6. Click Save to save the settings.
Set Attendance Status
You can set the attendance mode on the device via the client. You can also set the attendance
parameters as check in, check out, break out, break in, overtime in, and overtime out on the
device according to your actual needs.
Note
This function should be supported by the device.
Disable Attendance Mode
Disable the attendance mode and the system will not display the attendance status on the device
initial page.
Before You Start
Add at least one person, and set the person's authentication mode. For details, see Person
Management.
Steps
1. Click Access Control Advanced Function More Parameters to enter the More Parameters
page.
2. Select a device from the left panel.
3. Click Attendance Status.
4. Set the attendance mode as Disable.
5. Click Save.
Result
The attendance status function is disabled, and you will not view or configure the attendance
status on the device initial page.
Set Manual Attendance
Set the attendance mode as manual, and you can select a status manually when you take
attendance on the device.
Before You Start
Add at least one person, and set the person's authentication mode. For details, see Person
Management.
Loading ...
Loading ...
Loading ...